|
Glass
Resins are a family of high performance thermosetting polysiloxane
resins based on an alternating silicon-oxygen network. They
are manufactured from specially purified monomers by a patented
process which yields polymers with exceptional properties.
The Glass Resins cure by condensation, and once cured, are
insoluble in most common organic solvents.
High
temperature Resistor coating GR-150
- Binder
for filled & clear top coats for 200 °C (+) Service
Temperature.
- Operates
up to 300 °C, Chemical Resistance, good dielectric strength.
Flame
Proof Resistor Coatings GR-100
/ GR-650
- Binder
for flame-proof, filled coatings
- Operate
at 250-300 °C, Chemical resistance, good dielectric
strength, nonflammable
Products
For Release Coating GR-650 /
GR-908 / GR-630
- Semipermanent
release agent for molding plastic and urethane parts
- Excellent
thermal stability. Chemically resistant
Laminates/Molding
Compounds GR-908
- Laminated,compression
or transfer molded parts for high temperatures (500-700F)
service
- Thermal
stability- less than 7% weight loss at 700 °F after
200 hrs. Chemically resistant. Retains flexural properties
after high temperature exposure.
- Glass
Mold Coating
Abrasion
Resistant Coating GR-650, GR-651L,
GR-653L,
GR-653LPP,
GR-654L
- Optically
clear, abrasion resistant coatings for lenses, molded parts
and architectural plastics
- Excellent
abrasion resistance. Chemically resistant. Enhanced light
transmission. Excellent weatherability.
|
